PVC Sheet 1.5mm & thicker (this is solid uPVC for walls etc)

Applications

A very useful and low cost material it is used for hundreds of purposes including signs, electrical insulation & jacketing, pipes & chemically resistant tanks. Building external cladding and roofing & internal wall cladding & bathroom & specifically shower panels. Many other uses include component engineering and fabrication.

For thin PVC sheets 1.2mm or thinner, please visit the Thin Plastics Sheet page by clicking here.

Quote Now

Click here to request a detailed quote

 

  • Sizes/ Uses/ Properties
  • Technical and Other Data
  • Colour Information
Shapes
Colours (do not take colours below as indicative. See colour page.)
Thickness (mm)
Max Sizes (NB: We cut to size from these)
Price Guide per Square Metre (Material Price Only)
Sheets Black Satin 6, 12, 20mm
2000 x 1000mm
Ask
  Black Satin 3mm
2440 x 1220mm
Ask
  Black Satin 3 & 6mm
3050 x 1500mm
Ask
Sheets Grey Satin

1.5, 2, 3, 4.5, 6, 12, 15, 20mm & higher by request

2000 x 1000mm
Ask
  Grey Satin 1.5, 2, 3, 4.5, 6, 9, 12, 15, 20, 25mm
2440 x 1220mm
Ask
  Grey Satin 1.5, 2, 3, 4.5, 6, 12, 15, 20mm
3050 x 1500mm
Ask
Sheets Red Satin 2, 3, 4, 6, 10, 12, 15mm
2000 x 1000mm
Ask
  White Satin & White Gloss by special request 1.5, 2, 2.5, 3, 4.5, 6, 9, 12, 18mm

2440 x 1220mm

Ask
  White Satin & White Gloss by special request 2, 3mm
3050 x 1220mm
Ask
  White Satin & White Gloss by special request 3, 4.5, 6, 9, 12mm

3050 x 1500mm

Ask
Sheets Pastel Blue, Pastel Grey, Pastel Green Cladding. 2.5mm
2440 x 1220mm
Ask
  Pastel Blue, Pastel Grey, Pastel Green Cladding. 2.5mm

3050 x 1220mm

Ask

Key Properties

Excellent corrosion resistance. Will withstand strong acids but only in temperature band (-20°C to +65°C). Very tough with high impact strength at room temperatures. Easily machined and fabricated. Edges can be scraped smooth but not highly polished.

Strengths

  • Cheap, good acid and alkali resistance
  • Stiff and strong
  • Good vapour barrier properties
  • Good UV resistance

Limits

  • Limited solvent stress cracking resistance
  • Becomes brittle at 5°C (40°F) unless impact modified
  • Low continuous service at temperature of 50°C (120°F)

Chemical Name

Unplasticised PVC
(uPVC)

Keywords

Corrosion Resistance, Replacement Parts, Bathroom Panels

Additional Information

PVC Sheet (Rigid PVC)

For thin PVC sheets 1.2mm or thinner, please visit the Thin Plastics Sheet page by clicking here.

Density g/cm^3
Shrinkage %
UV Resistance
Transparency (% visible light transmission) %
H2O Absorption After 24 hours %
Maximum Continuous Working Temperature (Zero Tensile effect after 11 years)
   

Low °C

High °C

1.40
0.1 to 0.6
Fair
circa 80
0.04 to 0.4
5
50 
Hardness Shore D Mpa
Tensile Strength at Break Mpa
Elongation at Break %
Flexural Modulas Gpa
Toughness by Notched IZOD Impact at Room Temperature J/m
Fire Resistance LOI %
Dielectric Strength (Insulation Value) KV/mm thickness
65 to 90
35 to 60
25 - 80
2.1 to 3.5
20 to 110
40 - 45
10 - 40

Polishing

Edges can be made smooth but not highly polished.

PVC - Colours

Colours

White is available with various finishes of Gloss and Matt on either side.

Dark Grey which is like Battleship Grey is available. Red and Black are available but there is a longer lead-time and limited thicknesses.

We also stock Pastel Shades of Green, Blue and Grey and also Cream in 2.5mm and White in various thicknesses. Also we have Woodgrain finishes 1.5mm thick for for doorskins etc as below-

White & Cream - Not shown as it disappears on the monitor.
Pastel Green, Pastel Blue, Pastel Grey
Woodgrains - WG1 is like Mahogany and WG3 is slightly darker than WG1. WG2 is a Sherwood Golden Oak grain.

 

 

« Back to previous page | Back to top of page ^^


PRODUCTS:
Acrylic (Perspex™) Sheet.
Acrylic Rods, Tubes & Fluorescent Colours.
Acrylic globes, domes, spheres, hemi-spheres & balls.
Acrylic blocks.
Acrylic display panels & support mounts.
Acrylic mounting blocks.
Acrylic blocks joined with magnets.
Multi wall Polycarbonate.
Foamed PVC panels.
Forex Smart & Foam X mounting sheets.
Polycarbonate sheets, rods, tubes.
Polycarbonate globes.
ABS sheets.
Aluminium Composite sheets.

PETG, APET, (Polyester) sheets.
Polyamide (Nylon) sheets & rods.  

Polyethylene (HDPE) sheets.
EcoPanels (Recycled LD Polyethylene) Low cost thick sheets.
Polypropylene sheets - over 2mm thick.
Polypropylene sheets - under 1.2mm thick.
Polystyrene (HIPS) including multi-colour thin sheets.
Polysulphone, PEI, PEEK sheets.
PVC Solid sheets. (Cladding etc) 2mm to 12mm.
PVC Low Density Rigid Foam sheets.
PVC Forex Smart & Foam X sheets.
PVC Thin Flexible sheets from 0.140mm to 2mm.
Thin Plastic sheets - Polypropylene, PVC.
UHMWPE Polyethylene 1000.
Globes, Domes, Balls, Hemi-spheres.

 

Terms of Business
Privacy Policy
Copyright © 2017 eSheet Ltd.
Registered in England & Wales, No. 8088486

www.esheet.co.uk

Tuesday 21st of November 2017